PRODUCT OVERVIEW
This practical module uses a closed-loop water dosing, heating, cooling and recirculation system to teach process instrumentation, sequence monitoring and Industrial Internet of Things (IIoT) data collection. Water is dispensed from Tank A into a heating vessel. After heating, it is discharged into a separate measuring container to verify the delivered volume. One cycle is counted when the volume measurement is complete. The measured water then drains into Section A of the main reservoir, where a circulating water cooler brings it down to the required temperature. Once the cooling setpoint is reached, the water transfers to Section B. A return pump sends the cooled water back to Tank A for the next batch.
LEARNING OUTCOME
- Explain the process sequence.
- Configure sensors and data collection.
- Build a dashboard that displays live readings, historical trends and equipment operating status.
- Configure alarms and notifications in an IoT system.
- Use trends and alarm history to locate process delays and distinguish between dosing issues, slow heating, slow cooling and delayed refilling based on measured data.
COURSEWARE
Training module consists of:
- Introduction to Industrial IoT
- Industrial Networking Protocol
- IoT Project Creation
- IoT Dashboard
- EMS Analysis
- Lab/Experiments Manual